Kinook Software Forum

Go Back   Kinook Software Forum > Visual Build Professional > [VBP] Third Party Tools
FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 02-12-2007, 12:53 PM
smeadows smeadows is online now
Registered User
 
Join Date: 02-12-2007
Posts: 5
Failure due to log being truncated

Once in awhile we get this problem where the project thinks there is a failure, but there isn't.
The log file generated is truncated in the middle of a line from visual studio's log. It also gets truncated at different spots each time.
This doesn't happen all the time. We have it setup to run automatically on a 10 minute recurring schedule. Even when no files have changed, we will get a failure about every 10th build.
This is the output from Visual Build Pro:

GraphicsIncludes - 0 error(s), 0 warning(s)
========== Rebuild All: 32 succeeded,2/12/2007 9:24:23 AM: Step 'Build the solution' failed
2/12/2007 9:24:23 AM: Building failure step 'Failure'...
2/12/2007 9:24:23 AM: Building failure step 'Set Macro'...


Has anyone else seen this and know what's going on?

thx
Reply With Quote
  #2  
Old 02-12-2007, 04:55 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
Please ZIP and send or post:
1) The info from Help | About | Install Info
2) The version+SP of Visual Studio being used
3) The .bld file
4) A truncated build log file
5) The .sln file and project files (no source code files)

Thanks.
Reply With Quote
  #3  
Old 02-13-2007, 11:18 AM
smeadows smeadows is online now
Registered User
 
Join Date: 02-12-2007
Posts: 5
Okay a little more information,

We are running it on a dual processor machine.
Does VBP even support devenv.exe on dual processors?

Another thing we noticed is that we have the option
"Parse build output for failed projects"
turned on, in the help it says this:
Parse build output for failed projects: Sometimes, devenv.com will return a success (0) exit code even if one or more projects failed to build. If this box is checked, the action also parses the build output to verify that 0 projects failed to build, and if an error condition is found, the step will also be marked as failed. This flag does not apply when building Visual Studio 2005 projects with msbuild.exe.

In what cases will it return 0 on a failure?
Has this been documented anywhere by microsoft, cause I can't find any more info on it?
Would this in fact try to parse the log before the spooler finsihed dumping it?

thx for your help
Reply With Quote
  #4  
Old 02-13-2007, 12:44 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
If you have that option checked, the action looks for the string ', 0 failed,' in the log output. I don't know under what conditions devenv will return 0 when project(s) actually failed to build (some customers reported encountering this problem, so we added that option as a workaround).

The parsing this option triggers does not occur until the devenv process has completed and all output has been captured. I suspect that in your case, devenv is not always outputting all of the log info. I would suggest trying it with that option unchecked to see if it helps.

Please send the details previously requested if this doesn't help. Thanks.
Reply With Quote
  #5  
Old 02-13-2007, 12:52 PM
smeadows smeadows is online now
Registered User
 
Join Date: 02-12-2007
Posts: 5
Do you know if Visual Build Pro has any issues when using a multi core machine to build VS.2005 solutions?
Reply With Quote
  #6  
Old 02-13-2007, 03:42 PM
pjaquiery pjaquiery is online now
Registered User
 
Join Date: 01-20-2003
Location: Dunedin, New Zealand
Posts: 114
For historical reasons we are using the devenv command line (rather than the built in VBP step) to build on a dual core system. We had trouble trying to get VCBuild working when we first installed VS 2005 and haven't retried since applying the service pack. I'm hazy on the details, but we have set things up for a single processor compile to avoid early problems we had. At some point soon we'll revisit the 2005 build process and see if we can get it to work correctly using multiple cores.

With VS 2003 we had occasional link errors that caused trouble with our builds. Retrying the compile if a link error was detected fixed the problem.

Update: I should have noted that none of the issues are VBP related - command line builds showed the same problems.

Last edited by pjaquiery; 02-13-2007 at 04:27 PM.
Reply With Quote
  #7  
Old 02-13-2007, 04:25 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
We're not aware of any VBP issues when building VS 2005 solutions on multi-processor systems.
Reply With Quote
  #8  
Old 11-06-2008, 07:12 PM
MikePeterson MikePeterson is online now
Registered User
 
Join Date: 09-26-2005
Posts: 10
Was this issue ever resolved. I have a VS2005 compile step with post-build actions that's reporting a failure. The log appears truncated as described here, it contains a "0 failed", and otherwise looks correct. Thanks.
Reply With Quote
  #9  
Old 11-06-2008, 08:04 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
Are you saying that VS indicates a failure, but the step succeeds? Or that it doesn't indicate a failure, but the step fails? Or?

Have you tried unchecking the 'Parse build output for failed projects' option on the Project/Solution tab? That apparently resolved the problem for smeadows.

Another possibility is that devenv/msbuild returned a non-zero exit code even when the output indicates no failures. In that case, one workaround might be to change Step.BuildStatus = vbldStepStatSucceeded in the vbld_StepDone script event.

If that doesn't help, please ZIP and post or send to support@kinook.com:
1) The info from Help | About | Install Info
2) The .bld file
3) A build log file
4) The .sln file and project files (no source code files)

Thanks.
Reply With Quote
  #10  
Old 11-07-2008, 08:56 AM
MikePeterson MikePeterson is online now
Registered User
 
Join Date: 09-26-2005
Posts: 10
Thanks for the quick response and I apologize for not providing sufficient information about the issue.

To answer your question, the step fails but from the preceding log it looks like VS successfully did everything it was supposed to do.

Here's the step:
11/6/2008 3:07:37 PM: Building subroutine step 'Build National plug-in'...
Pre-processing... C:\Products_NemsisNational\NationalPlugin\National Plug_In.csproj...setting properties...setting version...
Building configuration 'Release|Any CPU'...
Command: "C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.com" "C:\NemsisNational\NationalPlugin.sln" /build "Release|Any CPU" /Out "C:\Products_NemsisNational\NationalPlugin.log "

All project return:
Compile complete -- 0 errors, 0 warnings

The solution includes some post-build steps:
mkdir "XSLT"
copy "C:\Products_NemsisNational\XSLT\*.XSLT" "XSLT\"
mkdir "XML"
copy "C:\Products_NemsisNational\XML\*.*" "XML\"
mkdir "SQL"
copy "C:\Products_NemsisNational\SQL\*.sql" "SQL\"
and that result in corresponding:
1 file(s) copied.
35 file(s) copied.
1 file(s) copied.11/6/2008 3:07:49 PM: Step 'Build National plug-in' failed

One oddity from an appearance standpoint in the log is that all of the post-build commands are grouped together, then there's a space, and then all of the command output is grouped together (i.e. you do NOT see command, output, command, output, etc).

So... At this point I believe that everything's good - compiles were successful, all of the post-build folders have the right files, etc. - but then the step flags a failure.

I had seen the reference to the "Parse build output for failed projects" note but I really do want the step to fail if one of the projects does not compile properly (i.e. non-zero errors, whatever warnings). Am I misunderstanding how this property is used?

I'm not familiar with the Step.BuildStatus step but I wanted to respond to your reply first and I'll go start reading up on it now.

Thanks again for the help.
Reply With Quote
  #11  
Old 11-07-2008, 10:37 AM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
Uncheck the 'Parse build output for failed projects' option. That is just a workaround for VS 2003 apparently sometimes returning a non-zero exit code when the build actually failed. If devenv.com returns a non-zero exit code on failure (which it normally does), the step will still fail in VBP.
Reply With Quote
  #12  
Old 11-07-2008, 10:42 AM
MikePeterson MikePeterson is online now
Registered User
 
Join Date: 09-26-2005
Posts: 10
The build is successful after unchecking that property. Sweet!!! Thanks again for the quick responses.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 11:02 PM.


Copyright © 1999-2023 Kinook Software, Inc.