Kinook Software Forum

Go Back   Kinook Software Forum > Visual Build Professional > [VBP] General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 11-14-2003, 12:55 AM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
First FTP step always fails

I am using FTP steps in a "Process Files" loop

the first FTP step always fails.

If I step it using F10, it then works, and I can continue by pressing F7 and the rest of my FTP steps then work fine.

It appears as though the FTP step is unable to retry.

can anyone suggest why this might be happening ?

Regards

David E
Reply With Quote
  #2  
Old 11-17-2003, 08:32 AM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,003
That is strange. Could you turn on full logging (see logging to All + Hex dump on the FTP tab) for the FTP step, build again, and send:

1) the log file
2) the .bld file
3) the info from Help | About | Install Info

to support@kinook.com
Reply With Quote
  #3  
Old 11-17-2003, 05:51 PM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
FTP problem - Install Info

Thanks for your help on this

The Install Info is attached,

We'll be building again this afternoon at 4:30pm Australian time, I have already changed the build script to the logging method you specified, and tomorrow I'll send you the results...

Regards
David Every
Devtest Pty Ltd
Attached Files
File Type: txt visualbuildinstallinfo.txt (621 Bytes, 1034 views)
Reply With Quote
  #4  
Old 11-18-2003, 03:29 PM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
Unhappy FTP problem - Install Info

I am unable to attached the hex dump part of the log file, and the FTP section of the build script. (These have been cut down due to their size, but still add up to over 9MB zipped)

Can you please advise how I get this file to you ?

Thanks
Reply With Quote
  #5  
Old 11-21-2003, 01:04 AM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
FTP fails - script attached

heres the script, cant send the hex dump, its too big
Attached Files
File Type: bld sdc_ftp_build.bld (20.1 KB, 1072 views)
Reply With Quote
  #6  
Old 11-21-2003, 07:42 AM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,003
Just send the log output from the start of the build to the end of the first failed FTP step. If even that's still huge, try using a logging level of All. You can send it to support@kinook.com.
Reply With Quote
  #7  
Old 11-24-2003, 03:29 PM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
partial hex dump file from FTP steps

ok cool, heres the partial dump log
Attached Files
File Type: zip 1.0.0.1236_ftphexdump_partial.zip (5.8 KB, 1033 views)
Reply With Quote
  #8  
Old 11-25-2003, 08:54 AM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,003
The server appears to return a failure code the first time the password is submitted. You could try creating a dummy FTP step at the start of the build and mark it to ignore failure.
Reply With Quote
  #9  
Old 11-30-2003, 03:27 PM
davidevery davidevery is online now
Registered User
 
Join Date: 06-03-2003
Location: Sydney Australia
Posts: 16
FTP problems

Hi
I tried the dummy ftp line but it didnt work, the next ftp line still failed. So I started using external ftp batch files called from Visual Build and that works perfectly. I believe there is a problem in the FTP part of Visual Build. I have attached some examples of FTP batch files for you experimentation

Regards
David E
Attached Files
File Type: zip ftpbatch.zip (403 Bytes, 980 views)
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 08:19 AM.


Copyright © 1999-2023 Kinook Software, Inc.