Wscript.Echo not working

[teognost]

Hi
I have a Run Script step (VBScript) inside my Visual Build project which contains:
Wscript.Echo "Test message"
When i start it in Visual Build the message is shown in the log.
But when I run it command line like this:
"c:\Program Files\VisBuildPro9\VisBuildCmd.exe" /b "c:\Program Files\VisBuildPro9\Test.bld"
the message is now shown in the log.
Any idea why and how can I make it visible ?

[kinook]

It works in my tests. Using the attached project, and building with

"C:\Program Files\VisBuildPro10\VisBuildCmd.exe" D:\temp\test.bld

it outputs

11/23/2021 7:22:54 PM: Starting Build: 'D:\temp\test.bld'
11/23/2021 7:22:54 PM: Building project step 1 - Project steps...
11/23/2021 7:22:54 PM: Building project step 2 - Run Script...
Test message
11/23/2021 7:22:54 PM: Build successfully completed (elapsed = 00:00:00).

Please send the info from

https://www.kinook.com/Forum/showthread.php?t=3044

[teognost]

I cannot open\run the test project as I have VisBuildCmd (x64), Version 9.7.0.1 and yours is a newer version.
Would be possible to give me the same test project but version 9.7?

[teognost]

I tried my test project on other machine -wscript.echo worked ,i had the test message in the log.Any idea why on that specific machine the command does not work?Could be some Visual Build setting causing this issue?

[kinook]

Open the .bld file in a text editor and change the version to 9.

I don't know, send the info in the link above and we'll see.

[teognost]

I ran it and the echo did not work:
:\Program Files\VisBuildPro9>"c:\Program Files\VisBuildPro9\VisBuildCmd.exe" "c:\Program Files\VisBuildPro9\Test.bld"

VisBuildCmd (x64), Version 9.7.0.1

11/24/2021 9:04:54 PM: Starting Build: 'c:\Program Files\VisBuildPro9\Test.bld'
11/24/2021 9:04:54 PM: Building project step 'Project steps'...
11/24/2021 9:04:54 PM: Building project step 'Run Script'...
11/24/2021 9:04:54 PM: Build successfully completed (elapsed = 00:00:00).

The link you provided is for Ultra Recall,could you please tell me which one is for Visual Build...

[teognost]

I found it:
https://www.kinook.com/Forum/showthread.php?t=3044
I will send the info required here

[kinook]

In the .config file, set the LogLevel to 3, or in the UI, set Tools | Application Options | Logging (More) | Log Level to Detailed.

[teognost]

Thanks,this change in log level to detailed solved the issue